Safety Instructions Before Use
Before turning on the PLENTY, make sure of the following points:
- All vapors from flammable cleaning agents or disinfectants have evaporated.
- Openings, including the mouthpiece and cooling coil, are free of foreign objects.
- The vaporizer and power supply show no external damage.
- The nameplate on the device matches your local mains voltage.
- The power cord and plug are in good condition.
- The device is only connected to a properly installed and grounded outlet.
Turning On/Off
Turning On
It is best to fill the filling chamber and attach the cooling coil before turning on the device.
- Plug in the device and press the orange power switch.
- The light on the power switch lights up to indicate that the device is heating up.
- If the auto-off release lever has already been activated, the heating process starts automatically. Otherwise, the heating process must be started by pressing the orange auto-off release lever.
Turning Off
Unplug the power cord.
- Allow the device to cool down completely before storing it.
- Do not touch any components of the filling chamber until they have cooled down, except the textured surface and handles.
Usage
- Wait until the set temperature is reached.
► This is indicated when the orange control light goes off. - Place the mouthpiece between your lips.
- Inhale slowly and evenly until your lungs are half full.
- Hold your breath for a few seconds, then exhale slowly.
► The higher the temperature, the more the flavor is affected.
Using the Dosing Capsule Adapter
The dosing capsule adapter is intended for inhaling small amounts of herbs or for using dosing capsules. The dosing capsule adapter is inserted into the filling chamber housing instead of the cylinder.
Setting up the PLENTY
The PLENTY is designed for operation and use by hand.
To set the PLENTY down briefly, insert the wooden handle of the cleaning brush into the screw hole near the rubber foot to support the PLENTY.