Temperature Control via One-Button System
Base Temperature
- Switch on your VEAZY to activate heating to Base Temperature.
- Continuous orange light of the LED display indicates heating.
- Default: 180 °C / 356 °F
- ► A double vibration and green, continuous light of the LED display (both LEDs) indicate that the Base Temperature has been reached
- The VEAZY automatically switches off three minutes after the last button press or detected inhalation.
Booster
- When Base Temperature is reached, double-click the Power Button (ON/OFF) to activate the Booster.
- Slowly flashing orange light of the LED display indicates heating.
- Default: +15 °C/+27 °F
- ► A double vibration and green, continuous light of the lower LED display indicate that the Booster Temperature has been reached.
- The Booster deactivates automatically after 90 seconds*, returning to your set Base Temperature.
Superbooster
- When Booster Temperature is reached, double-click the Power Button (ON/OFF) to activate the Superbooster.
- Rapidly flashing orange light of the LED display indicates heating.
- Default: +15 °C/+27 °F
- ► A double vibration and green, continuous light of the upper LED display indicate that the Superbooster Temperature has been reached.
- The Superbooster deactivates automatically after 90 seconds* as well as by double-clicking the Power Button (ON/OFF), returning to your set Base Temperature.
Pro-Tips:
► *Activate the Permanent Boost in the S&B Web App to disable the 90 second timeout.
► All default temperature levels can be customized precisely to the degree via the S&B Web App.
Temperature Settings via S&B Web App
Simply adjust your desired current temperature precisely to the degree via the S&B Web App by clicking the + and – symbols next to the temperature displayed.
With this feature you can also customize:
- Base Temperature: Default temperature your VEAZY will heat to when switched on.
- Booster & Superbooster: Two convenient temperature increases, activated by double-pressing the power button.
Pro-Tip: Activate the “Permanent Boost” in the S&B Web App section “Settings” to disable the 90-second Booster and Superbooster timeout.