Cleaning

• After each use, it's best to empty the Filling Chamber right away and remove coarse deposits with the provided Cleaning Brush or, if necessary, a quick, controlled puff of air. This extends the time between thorough cleanings.
• Clean the Cooling Unit and Mouthpiece no later than 7 days after the last use, or whenever deposits are visible.
• Before every thorough cleaning: Check all components for wear or buildup. Replace clogged Screens and damaged parts to ensure safe operation and optimal performance.

• Switch off your VEAZY.
• Disconnect the Vaporizer from USB-C Cable.
• Unplug the USB-C Cable from mains supply.
• Clean the housing of your VEAZY and the USB-C Cable only with a dry soft or damp cloth.

1. Turn off the VEAZY and unplug the USB-C Cable.
2. Disassemble the Cooling Unit. (Read: "Disassembling the Cooling Unit")
3. Remove the Filling Chamber Screen:

• Using pointy tweezers, cautiously lever the Screen out of the rim from the side of the Filling Chamber until the Screen detaches from the groove.
• Pinch the Screen with the tweezers and remove it from the Filling Chamber.
• If a Screen is clogged or damaged, it must be replaced.

4. Place all parts in:

• Option 1: Warm rinsing water for 5-30 minutes
• Option 2: Isopropyl alcohol for max. 30 minutes.

5. Rinse all parts under running water for at least one minute.
6. Let all parts dry completely!
7. Reassemble the Cooling Unit.
8. Reinsert the Filling Chamber Screen:

• Carefully bend a cleaned Screen beforehand or use a new Screen.
• With the curved side facing upwards, insert the Screen into the Filling Chamber.
• Using the Filling Chamber Tool, press the Screen flat into the provided groove.

Watch: VEAZY - Quick Start (from minute 5:25)

Remember: A clean VEAZY means the best vapor results, unrestricted airflow, and longer-lasting performance.