LED Display Options

• Continuous blue light
  ► Battery is fully charged
   
• Blue blinking or flashing
  ► Charging status (during the charging operation or following switch off*)
   
• Green/red/blue (short illumination)
  ► Start of the charging process
   
• Blue and yellow** blinking
  ► Charging with USB-C to USB-A cable
   
• Blue and magenta** blinking
  ► Charging with a low power charger
   
• Blue and green** blinking
  ► ECO charging mode

*After switching off, the LED indicator lights up, blinks, or flashes for about 10 seconds.
**Lower LED; on every 10th blinking cycle

For each charging mode, the flashing frequency indicates the charging status of the battery:

• Slowly blinking: 61 and 98%
• Rapidly blinking: 31 and 60%
• Blue flashing: max. 30%

Read more: Charging

• Continuous orange light
  ► Heating (Base Temperature)
   
• Continuous green light
  ► Base Temperature has been reached
   
• Orange blinking (slowly)
  ► Heating (Booster Temperature)
   
• Continuous Green Light of lower LED
  ► Boost Temperature has been reached
   
• Orange blinking (rapidly)
  ► Heating (Superbooster Temperature)
   
• Continuous Green Light of upper LED
  ► Super Boost Temperature has been reached

Read more: Temperature Settings

Green/red/blue (running lights)

Read more: Resetting the VEAZY

• Continuous red light (lower LED) and white/blue blinking (upper LED)
  ► Device temperature is too high.
  ► Let the Vaporizer cool down.
   

• White/blue blinking (lower LED) and continuous red light (upper LED)
  ► Device temperature is too low.
  ► Move the Vaporizer to a warm environment. (Do not heat the Vaporizer with an external heat!)
   

• Continuous red light (lower LED) and white/red blinking (upper LED)
  ► USB charger or USB-C cable is not suitable.
  ► Only use original STORZ & BICKEL accessories.
   

• Continous white light (both LEDs)
  ► Vaporizer is faulty.
  ► Switch off the Vaporizer immediately.
  ► Pull out the plug.
  ► Contact our Service Center.
   

• Continuous red light (lower LED) and continous white light (upper LED)
  ► Firmware update did not work, retry update.
  ► Perform the firmware update. If the update fails multiple times, please contact our Service Center.

• Blue blinking
  ► BLE connection
   
• Continuous blue light
  ► Device is connected

Green/red/blue (running lights)

Read more: Main Features of the S&B Web App