1. Storz & Bickel Support - English
  2. My Devices
  3. VEAZY

Charging

Updated
Important Safety Instructions
  • Do not charge the VEAZY using incompatible or damaged cables and power adapters, as well as external power sources outside of STORZ & BICKEL’s recommended accessories.
  • For general charging, a USB charger with 5 VDC / 3 A (15 W) is recommended.
  • Verify the power source and ensure the specifications on the type label match your local mains supply.
  • Always switch off and disconnect the VEAZY from the mains supply:
    ► After charging  
    ► When not in use  
    ► Before cleaning or maintenance  
    ► During thunderstorms 
Charging Process
  1. Connect the USB-C Cable supplied to the VEAZY and a suitable USB-C charger.
  2. Connect to the mains supply.
  3. The charging process is acknowledged with a short illumination of the LED display (green/red/blue) and a vibration.
  4. After charging, disconnect the USB-C Cable from the mains supply and then from the VEAZY.

► The VEAZY is charged to 80% in about 40 minutes.

Explanation of LED Display During Charging

During the charging process, the LED display of your VEAZY shows a flashing or steady blue light, indicating the battery charge status:

  • Blue flashing: max. 30 %
  • Blue, rapidly blinking: 31–60 %
  • Blue, slowly blinling: 61–98 %
  • Steady blue light: fully charged

The upper LED of your VEAZY will flash in blue, yellow, or magenta in every 10th flash cycle, depending on the charger used:

  • USB-C charger (recommended): blue
  • USB-C to USB-A: yellow
  • Low power charger: magenta (Charging may take significantly longer.)
Explanation of LED Display Following Switch Off

LED display overview following switch-off:

  • Steady blue light: 64–100 %
  • Blue, slowly blinking: 32–63 %
  • Blue, rapidly blinking: 1–31 %
  • Blue flashing: Battery is depleted
End of Charging Process

When the charging process is finished (steady blue LED light), first disconnect the USB-C Cable from the mains supply and then from the VEAZY.

ECO Charging Mode

In order to maximize your VEAZY’s battery life, you can activate the ECO charging mode via the S&B Web App (Website).
The lower LED flashes green every 10th flash cycle during ECO charging mode.
The upper LED flashes blue, the frequency indicating the battery charge status.

Find out more about all the features of the S&B Web App (Helpcenter article).

Articles in this section

Was this article helpful?
2 out of 6 found this helpful
Submit a request