Standard USB-C Charging
- Fully charge the battery before first use.
- Connect the Vaporizer to a USB charger or computer using the USB-C Cable supplied.
💡 Depending on the type of charger, follow the instructions below
- Connect the USB-C Cable to the vaporizer and a USB power source.
Upon connection:
► The display briefly lights up.► The device vibrates once.► The battery display begins to flash, indicating charging has started.- The LED may flash green, red, or blue at the beginning of charging.
Charging with USB-C Supercharger
💡For the quickest charging time the MIGHTY+ can be used with our Supercharger.
To activate Supercharge and pass-through capabilities:
► Use the STORZ & BICKEL Supercharger with the following specifications:► USB-C to USB-C cable► Power Delivery support with output of +15V @ 3A► 45 W output recommendedWhen connected to a compatible Supercharger:
► Charging to 80% takes approximately 40 minutes► The display will briefly show the signal "dct" to confirm that pass-through charging is active- If the connected charger also supports pass-through operation, “dct” appears on the second line of the display for three seconds after connection
💡 Only original STORZ & BICKEL accessories and chargers should be used to ensure safe operation and maintain product warranty.
Battery Charge Display
- full battery: display of six charging status fields
- battery almost empty: Slowly flashing battery frame