Video (How to Clean)
Before Starting the Cleaning
- Turn off the Vaporizer.
- Disconnect the Vaporizer and the USB-C Cable from the power supply.
- Disassemble the Cooling Unit (Disassembly).
- Remove the Filling Chamber Screen.
(Video: How To replace the Filling Chamber Screen) - Clean the Vaporizer housing and the USB-C Cable only with a dry, soft, or slightly damp cloth.
Cooling Unit & Filling Chamber Screen
- Check all parts for damaged surfaces, cracks, softening, hardening, brittleness, contamination, or discoloration.
► Dispose of damaged parts.
- Use the cleaning brush and cotton swabs as well as paper or cotton cloths for manual cleaning.
► Do not moisten the cotton swabs too much!
- Clean the Filling Chamber Screen and the Cooling Unit screen after each use with the cleaning brush.
Option 1: Cleaning with warm dishwater:
- Soak all parts in warm dishwater for at least 5 minutes.
- Rinse all parts under running water for at least one minute.
- Allow all parts to dry completely.
Option 2: Cleaning with isopropyl alcohol:
- Soak all parts of the Cooling Unit and the Filling Chamber Screen in isopropyl alcohol for a maximum of 1/2 hour.
- Rinse all parts under running water for at least one minute.
- Allow all parts to dry completely.