Disassembling
Put the edge of the Mouthpiece into the notch at the Rotary Cap and turn it counterclockwise to open and pull out. Pull off the Seal Ring from the Rotary Cap using the recess. | |
| Pull the Cooling Unit Cap off the Vaporizer. | |
| Pull out the Screen inside the Cooling Unit. | |
| Use the Filling Chamber Tool to press the Setting Wheel out of the Cooling Unit and let the Seal Ring fall out. | |
| Unscrew the Cooling Unit Base from the Vaporizer by turning it 90° counterclockwise. | |
| Carefully press out the Screen from above using a cotton swab. | |
| Lever out the large Base Seal Ring with the Filling Chamber Tool at the recess in the groove. |
Assembling
If you want to assemble the parts, follow the instruction in reverse order.
- Place the Seal Ring just on top of the Setting Wheel for Airflow and make sure that the "TOP" label is inserted upwards.
- When assembling, make sure that Seal Rings are properly seated.
- Insert Screen in the groove provided for this purpose.