Video
Before starting the cleaning
- Turn off the vaporizer.
- Disconnect the vaporizer and the USB-C cable from the power supply.
- Disassembly:
► Remove the filling chamber screen.
🎥 Video: VENTY – How To replace the Filling Chamber Screen (by Storz & Bickel) - Clean the vaporizer housing and the USB-C cable only with a dry, soft, or slightly damp cloth.
Cooling unit & filling chamber screen
- Check all parts for damaged surfaces, cracks, softening, hardening, brittleness, contamination, or discoloration.
► Dispose of damaged parts - Use the cleaning brush and cotton swabs as well as paper or cotton cloths for manual cleaning.
► Do not moisten the cotton swabs too much! - Clean the filling chamber screen and the cooling unit screen after each use with the cleaning brush.
Option 1
Cleaning with warm dishwater:
- Soak all parts in warm dishwater for at least five minutes.
- Rinse all parts under running water for at least one minute.
- Allow all parts to dry completely.
Option 2
Cleaning with isopropyl alcohol:
- Soak all parts of the cooling unit and the filling chamber screen for up to 1/2 hour in isopropyl alcohol.
- Rinse all parts under running water for at least one minute.
- Allow all parts to dry completely.