Initiation of Charging Process
The CRAFTY+ charges via USB-C.
► To charge the device, connect the included USB-C cable to the vaporizer’s charging port and a power source.When the USB charger is connected, the LED display briefly lights up and the device vibrates
► This indicates the start of the charging process.
Battery Status During Charging
The battery charge status is shown by the LED’s blue light:
- Steady blue:
Fully charged
- Blue flashing:
≤30% charged or empty
- Rapid flashing:
31–60% charged
- Slow flashing:
61–96% charged
Operation Behavior & LED Guide
💡 You cannot operate the Vaporizer while it is connected to a power source with the USB-C Cable.
► You can only switch it on again after it has been charged.
💡 You can also charge the battery using the optional 12 V Car Charger.
► Connect the 12 V Car Charger to the nominal voltage socket of the Vaporizer and then to a suitable 12 V socket or cigarette lighter.