1. Storz & Bickel Support - English
  2. My Devices
  3. CRAFTY+

Temperature Settings

Updated

Heat-Up Time

The CRAFTY+ has a heat-up time of about 60 seconds.

The actual heat-up time may vary slightly due to the device's charge level, environmental conditions, and overall usage behavior.
 
Operating Temperature:
The CRAFTY+ should be operated within a temperature range of 5°C–35°C / 41°–95°F.
► Make sure that the ambient temperature is within this range to achieve optimal performance. 
Preset Temperatures

The CRAFTY+ features simple one-button control and comes factory-set with three preset temperature levels:

Base Temperature:
► 180°C / 356°F
Automatically activated when the device is turned on.

Booster Temperature:
► 195°C / 383°F
Activated by double-clicking the orange power button (ON/OFF).

Super Booster Temperature:
► 210°C / 410°F
Activated by triple-clicking the power button (ON/OFF) when the base temperature is the starting temperature.
Alternatively, the super booster temperature can be activated by double-clicking the power button (ON/OFF) when the booster temperature is the starting temperature. 

Temperature Adjustment via the Web App

The Web App is not necessary for operating the device but allows for individual customization:

  • Precise temperature setting between 40°C–210°C / 104°F–410°F
  • Adjustment of vibration signals
  • Display of battery status and total operating time
For the CRAFTY+, the booster and super booster temperatures cannot be adjusted individually in the Web App. However, a common offset can be set for both (e.g., +10°C).
 
App settings are saved on the device and remain active until manually reset by pressing the power button (ON/OFF) for about 5 seconds.
 
More information about the Web App can also be found here within the support section.
Cooling Unit

The vapor is routed through the cooling unit before inhalation. This contributes to a pleasant vapor experience.

The inhalation temperature depends on the following factors:

  • Amount of material in the filling chamber
  • Selected temperature
  • Intensity and duration of inhalation

Articles in this section

Was this article helpful?
7 out of 11 found this helpful
Submit a request