Cleaning

• Switch off the Vaporizer
• Disconnect the Vaporizer and the USB-C cable from the mains supply

• Disassembling

  ► Remove the Filling Chamber Screen.
  🎥  Watch: How To Replace The Filling Chamber Screen?
• Clean the housing of the Vaporizer and the USB-C cable only with a dry soft or damp cloth.

• Check all parts for damaged surfaces, cracks, softening, hardening, embrittlement, contamination or discoloration.

  ► Discard damaged parts

• Use the Cleaning Brush and cotton swabs and paper or cotton cloths for manual cleaning.

  ► Do not moisten cotton swabs too much!
• Clean the Filling Chamber Screen and the Screen of the Cooling Unit with the Cleaning Brush after each use.

Option 1
Cleaning with warm rinsing water:

• Place all parts in warm rinsing water for at least five minutes.
   
• Rinse all parts under running water for at least one minute.
   
• Let all parts dry completely.

Option 2
Cleaning with Isopropyl Alcohol:

• Place all parts of the Cooling Unit and the Filling Chamber Screen in isopropyl alcohol for a maximum of 1/2 hour.
   
• Rinse all parts under running water for at least one minute.
   
• Let all parts dry completely.